IMG 1736

SPECIFICATIONS:

  • Make: Magnum - MLT4060
  • Kind: Light Tower
  • Exterior: White
  • ENGINE

    • Kubota® D1005-E3BG1-MGM-1 - liquid cooled, diesel engine

    o Standby - 13.1 hp @ 1800 rpm

    o Prime - 11.7 hp @ 1800 rpm

    o 3 cylinder

    o 1.0 L displacement

    • Fuel consumption (prime) – 0.50 gph (1.89 lph)
    • 60 Hz engine/generator
    • Industrial engine exhaust system
    • Rubber vibration dampers isolate engine/generator from frame
    • Cooling system capable of operating at 120°F ambient
    • Full flow oil filter, spin on type
    • Fuel filter with replaceable element
    • Dry type cartridge air filter
    • Polyethylene fuel tank with large diameter opening

    O 30 gal. capacity

    O 60 hr. run capacity

    O 3 ½” fill port

     ENGINE CONTROLS

    • Engraved, aluminum punched and anodized control panel
    • Four position keyed switch – glow plugs (preheat, off, run, start)
    • Hour meter
    • Automatic low oil/high temperature shutdown system

     GENERATOR

    • Marathon Electric®

    O Brushless

    • 6 kW standby output
    • 120/240 VAC – 50/25A
    • +/-6% capacitor voltage regulation

     ELECTRICAL SYSTEM AND CONTROLS

    • Individual floodlight circuits with 15A breakers
    • Ballast indicator lights
    • 30A start limit breaker (assures no load condition exists before starting)
    • Standard individually breakered convenience outlets:

    O (1) 120 VAC 20 Amp GFCI duplex outlets (Nema 5-20R type)

    O (1) 240 VAC 30 Amp twistlock outlets (Nema L6-30R type)

    • 440 CCA wet cell battery
  •  FLOODLIGHTS

    • Four light fixtures – 1000 watts each - metal halide
    • Oval aluminum reflector
    • Tempered glass lens
    • Silicone gaskets for moisture and dust protection
    • Individual floodlight On/Off switches

     WIRING

    • All wiring is sized to the amperage draw required
    • AC & DC wiring diagrams are provided

     MAST

    • 30′ maximum extension, 3-section, tubular steel
    • Urethane guides on all sides of mast tubes
    • Industrial black powder coat finish
    • Automatic locking system in horizontal position for travel
    • 1500 lb. automatic self-braking winches
    • 360° rotation with locking system
    • Coiled mast cord
    • Dual winch system located at ergonomic height allowing single person operation
    • Equipped with single lifting eye and fork pockets

     ENCLOSURE

    • Steel enclosure – 14-gauge

    O UV& fade resistant, high temperature cured, white polyester powder paint

    O 68 dB(A) at 23 feet – prime power

    • Stainless steel hinges on doors
    • Multi-lingual operating/safety decals
    • License plate holder with light
    • Manual holder with operating manual

     TRAILER

    • Mast support - 3” square tube, ¼” wall
    • Removable tongue - 48” long
    • Tubular steel frame - 3/16” wall
    • Four, 2000 lb. adjustable leveling jacks – 4 point stance
    • All jacks transport and lock in horizontal position for storage
    • Side outriggers - 11’ 8” span
    • Safety chains with spring loaded safety hooks
    • 2” ball hitch
    • Single wall polyethylene fenders
    • DOT approved tail, side, brake, and directional lights

    O Recessed rear lights

    • 2200 lb. leaf spring axle
    • ST175/80D13 – 6 ply
    • 56 in. axle span

     WEIGHTS & DIMENSIONS

    • Dry weight: 1695 lbs (770 kg)
    • Operating weight: 1908 lbs (866 kg)
    • Mast stowed: 170 x 68 x 70 in (4.32 x 1.73 x 1.78 m)
  • IMG_1735
  • IMG_1736
  • IMG_1737

Simple Image Gallery Extended

Contact Us for your Query

title agents
Catherine Gomez
+63 906-342-1381
Sammy Ronquillo
+63 915-452-0815
Ana Mazo
+63 915-561-1344
Copyright © 2018 R33 Trucks. All Right Reserved.
Powered By Joomla Perfect